-
52015 Steel Master
tesa® Softprint 52015 STM is a double-coated foam tape, designed specifically for mounting photopolymer plates with a thickness of 1.14mm (0.045″) or 1.70mm (0.067″) in flexographic label printing. The medium-hard foam makes this the ideal solution for printing combinations and solids.
Product Features
- Highly compressible foam, with superior recovery behavior for excellent print quality
- Long lasting recovery characteristic for extended and high speed print runs
- Low thickness tolerances for quick print preparation and reduced waste
- High bonding on open side to steel cylinder or sleeve to avoid plate movement
- High bonding to plate to avoid edge lifting or plate movement
- Non increasing bonding power for easy repositioning and especially for easy demounting of plate and tape
- Very cohesive adhesive structure for demounting without adhesive residues
- The structured PP-liner prevents the formation of air pockets when plate mounting
- Blue color marking indicates the medium foam
-
52017 Steel Master
tesa® Softprint 52017 STM is a double-coated foam tape, designed specifically for mounting photopolymer plates with a thickness of 1.14mm (0.045″) or 1.70 mm (0.067″) in flexographic label printing. The soft foam makes this the ideal solution in printing screens and line work.
Product Features
- Highly compressible foam, with superior recovery behavior for excellent print quality
- Long lasting recovery characteristic for extended and high speed print runs
- Low thickness tolerances for quick print preparation and reduced waste
- High bonding on open side to steel cylinder or sleeve to avoid plate movement
- High bonding to plate to avoid edge lifting or plate movement
- Non increasing bonding power for easy repositioning and especially for easy demounting of plate and tape
- Very cohesive adhesive structure for demounting without adhesive residues
- The structured PP-liner prevents the formation of air pockets when plate mounting
- Red color marking indicates the hard foam
-
52117 Steel Master TP
tesa® Softprint 52117 STM TP is a double-coated foam tape, designed specifically for mounting photopolymer plates with a thickness of 1.14mm (0.045″) or 1.70mm (0.067″) in flexographic label printing.
Product Features
- Foam properties:Highly compressible foam, with superior recovery behavior for excellent print quality. Long lasting recovery characteristic for extended and high speed print runs. Low thickness tolerances for quick print preparation and reduced waste.
- Adhesive properties: High bonding on open side to steel cylinder or sleeve to avoid plate movement. Sufficient bonding to plate to avoid edge lifting or plate movement. Non increasing, controlled bonding power for easy repositioning and especially for easy demounting of thinner plates. Very cohesive adhesive structure for demounting without adhesive residues.
- Additional properties: The structured PP-liner prevents the formation of air pockets when plate mounting. Red color marking indicates the soft foam.
- The soft foam makes this the ideal solution in printing screens and line work.
-
53123
The values in this section should be considered representative or typical only and should not be used for specification purposes.
-
7066 High Adhesion
The tesa® ACXplus 706x series is designed for bonding of “hard-to-bond-materials” such as powder coatings or plastic materials. Even in combinations of such materials, this product provides advanced safety due to its innovative product design. It is a high-performance acrylic foam tape for permanent indoor mounting applications.
Product Features
- High adhesion levels on hard to bond substrates
- Resistance to plasticizer migration
-
-
Black Grades
Lumirror™ black grades are black PET films colored by compounding. They have excellent light shielding properties.
Lumirror™ black grades are black films colored by compounding. They have excellent light absorbing and shielding properties.Features
- Excellent toughness
- Electrical insulation
- Heat and cold resistance
- Excellent chemical resistance (except for strong alkalis)
- Black
-
-
Compounded Matt Grades
Lumirror™ compounded matt grades are low gloss PET films made by compounding.
Lumirror™ X42 (low gloss) and X44 (high gloss) types are matt films made by compounding.
They are used for matt design transfers, as film for transport, etc.Features
- Matt design transfer
- Transportable
-
Electrical and Electronic
$12.57T60, S10, X30, H10, E20, E22, X10S
Lumirror™ is widely used in various applications for electrical insulation such as motor, transformer, and other electronic parts as it has excellent insulation property.
-
Extremely Smooth Grades
Lumirror™ extremely smooth grades are PET films with excellent handling property and transparency. The number of FE(fish-eye defects) is controlled.
Lumirror™ high transparency grades are films that feature both extreme smoothness and slip. Its excellent slip makes it ideal for various mold release applications.Features
- Smoothness
- Handling properties
- Coarse roughness less
- Excellent conveyance
- Low FE
- Low haze
-
